Table of Contents
Advertisement
• If background printing is enabled, select the print monitor to see if there
is an error in printing.
• If you use the AppleTalk Administration Program, did you configure
the printer(s) correctly? Are PostScript printers indicated by a Yes
and non-PostScript printers indicated by a No?
7.10 Troubleshooting: TCP/IP Protocol
Making netprint.conf Edits
You can edit the netprint.conf file if, for instance, you want to change
the IP address or subnet mask value. Simply change these values in the
parameter column of netprint/conf. To edit the file, do the following:
1. Change directory to /usr/dpi. Type the following:
cd /usr/dpi
2. Write the current IP address. For example, type:
/usr/dpi/nsconfig 192.9.200.010
3. Now change your Ethernet Print Server's IP address by editing the
/etc/hosts file or through NDS or NIS to conform with the new address.
CHAPTER 7: Troubleshooting
121
Advertisement
Table of Contents
Troubleshooting
