Installing And Printing On Ver. 1 Sol. And Osf1 Systems - Black Box LE3840A Manual

• lprm—The lprm command removes a job from the queue for printer
printer_name. Job_num can be obtained from the lpq command.
lprm -P <printer_name> <job_num>
• lpc—The lpc command provided Line Printer Control functions
including and exceeding the basic commands listed above. Refer to your
system's documentation for more detail.

6.6 Installing and Printing on Ver. 1 Sol. and OSF1 Systems

Continue installation begin in Section 6-4.
6. What is the node name of the Ethernet Print Server unit? For example,
type the following and press return:
DPIfast
7. What is the printer name for the printer attached to the Ethernet Print
Server? Type a printer name and press return.
8. What type of Ethernet Print Server are you installing? Select one of the
following choices:
• 1) Ethernet Print Server High Speed
• 2) Ethernet Print Server 4-Port
Type 1 or 2 and press <Return>.
9. Which port do you want your printer attached to? The screen will display
a list of ports available on this Ethernet Print Server. Select one and press
return.
For example, type 1 and pres return.
10. Your screen will now display the information you provided the install
script. For example:
Type of the Ethernet Print Server: Ethernet Print Server
Node name of the Ethernet Print Server: DPIfast
Printer name to be used by this printer: <printer_name>
The printer is attached on: port 1
You are asked to accept this configuration. Type "yes" or "no" and press
return.
CHAPTER 6: UNIX Printing through TCP/IP
93