Appendix C: Assigning Multiple File Servers To A Novell Print Server; Introduction; How To Assign Multiple File Servers - Black Box LE3840A Manual

ETHERNET PRINT SERVERS HIGH SPEED AND 4-PORT
Appendix C. Assigning Multiple File
Servers to a Novell Print Server
C.1 Introduction
You can assign multiple file servers to the Ethernet Print Server using the
NetWare PCONSOLE utility.
• During the initial installation, you can assign multiple file servers to the
Ethernet Print Server as part of the software installation.
• If you have completed the installation, then you use PCONSOLE to assign
the file servers to the Ethernet Print Server. In order for the Ethernet
Print Server to service the newly assigned file servers, you need to power
the Ethernet Print Server off and back on again.
C.2 How to Assign Multiple File Servers
Use the following procedure to assign multiple file servers to the Ethernet
Print Server:
1. Go to each selected file server and create an Ethernet Print Server as
described in detail in Chapter 3. To create a print server, choose Print
Server Information on the Available Options menu.
2. When the print server menu appears, press the <Ins> key to display the
new print server name entry box. Type in the name of the Ethernet Print
Server using the serial number printed on the label located on the
bottom of the Ethernet Print Server unit. Type in the name as follows:
NPS_<serial number>
3. Press <Enter> once you type in the Ethernet Print Server name. The
Print Server Information menu appears.
Choose Print Server Configuration on that menu.
Choose Printer Configuration on the Print Server Configuration menu. A
list of printers appears. Assign the Ethernet Print Server parallel printer 1
to Printer 0, parallel printer 2 to Printer 1, and parallel printer 3 to
Printer 2.
After you assign each printer a number, a Printer Configuration menu
appears for the printer. Under the field name TYPE, select Remote
Other/Unknown as the printer type.
134