Black Box LE3840A Manual page 14

Ethernet
10BASE-T
POWER
PARALLEL
PRINTER 3
10BASE-T
POWER
NETWORK
Plug the power
supply into this
connection.
10BASE-T Ethernet connection
uses an RJ45 twisted pair
cable to connect to the network.
Thin Ethernet connection uses a
BNC T-connector to connect to the
coaxial cable from the network.
Parallel connector for printer. Attaches the parallel printer to the Ethernet
Print Server High Speed. The Ethernet Print Server 4-Port series has two
additional parallel ports on the top row.
Fig. 3-1. Ethernet Print Server Back Panel.
UNIPORT
Thinnet
The Uniport connection
allows you to connect
any serial output device
using RJ 8-wire cable, or,
as any parallel output device
using a parallel adapter, or,
use as a host input port
connecting devices such as
minicomputers, hosts, or PCs.
CHAPTER 3: Installation
PARALLEL PRINTER
2
PARALLEL PRINTER
1
13