Introduction To Nimanage; How To Install - Black Box LE3840A Manual

ETHERNET PRINT SERVERS HIGH SPEED AND 4-PORT

4.5 Introduction to NIMANAGE

The Print Server program NIMANAGE is a PC-based program that includes
the following functions or utilities:
• Configure the Novell Print Server, Uniport Input Print Server, or printer
port.
• Reset the Print Server unit remotely.
• Help to troubleshoot problems on the Print Server.
Use the utilities to make changes to your Print Server setup or to update
your Print Server firmware with a new release.

4.6 How to Install

To install the Print Server software, you must do the following:
We recommend that you install the program on the file server, since the
utilities require communication across the network. Make sure you are
logged onto the network as SUPERVISOR (NetWare 2.15 or 3.10 and
above) or ADMIN (NetWare 4.0) before you begin.
1. Place the Print Server Utility and Diagnostics Program diskette into the
floppy drive of a workstation. If you are not installing the software on the
file server, then make sure you are using the workstation on which you
want to install the software.
2. Type A: (or B:) and press <Enter>. Type INSTALL and press <Enter>.
An information screen appears. Read the screen and press any key to
continue.
3. Accept or change the path where the Print Server Utility and Diagnostics
Programs will be placed. The default choice is SYS:\PUBLIC, shown on
the screen in Fig. 4-17. If you want to change it, use the arrow keys to
delete the default choice and type in a new path.
50
NOTE