How To Make Changes To The Print Server - Black Box LE3840A Manual

ETHERNET PRINT SERVERS HIGH SPEED AND 4-PORT
9. Press <Esc>, and the Save Changes screen appears. Select Yes and press
<Enter>. Press <Esc> until you receive the prompt to Exit PCONSOLE;
then select Yes and press <Enter> to exit.
4.10.6 H M
OW TO
Use Table 4-1 when making changes to the Print Server unit.
Table 4-1. Making Change to the Print Server Unit.
When you want to...
move the unit and printer
to another location on the same
network
move the unit and printer
from their current network to a
new network
attach new file servers to
the Print Server unit
remove a file server attached
to the Print Server unit
add new queues to the Print
Server unit.
remove queues from the Print
Server unit
68
C
AKE HANGES TO THE
P S
RINT ERVER
Then you must...
move the Print Server and printer to their
new location and make the hardware
connections as explained in Chapter 3.
You do not need to configure the unit with
PCONSOLE.
follow the hardware installation and software
configuration instructions in Chapter 3.
use the PCONSOLE utility. See Appendix
C for instructions.
use the PCONSOLE utility. See Appendix
C for instructions.
use the PCONSOLE utility. See Section
4.10.4.
use the PCONSOLE utility. See Section
4.10.4.