Nimanage: Choose The Print Server - Black Box LE3840A Manual

CHAPTER 4: Novell NetWare Configuration and NIMANAGE Utility
Ethernet Print Server High Speed/4-Port
Directory to load Software: SYS:\PUBLIC____________
If you wish to load to a different server, please exit and log
into the correct file server. To load to a different drive, simply
type the new drive letter as part of your directory.
<ENTER> Accept and continue.
<ESC> Exit install.
<F1> Additional help.
4. Follow the prompts you receive on the screen and remove the installation
diskette from the workstation drive when finished.
If you have installed the Print Server Utility on the file server, then you
initiate the program as follows:
• Log into the server as SUPERVISOR or ADMIN. Type NIMANAGE and
press <Enter> at the prompt. The NIMANAGE Main Menu appears.
If you have installed NIMANAGE on the hard drive of a workstation, then
you initiate the program as follows:
• Go to the directory on the hard drive where you have installed the Print
Server software.
• Type NIMANAGE and press <Enter>. The NIMANAGE Main Menu
appears.

4.7 NIMANAGE: Choose the Print Server

Choose the Print Server that you want to connect to. If you cannot
connect to the chosen Print Server for any reason, you receive an error
message. See Fig. 4-18.
Fig. 4-17. Changing the Path.
Use arrow keys to move
cursor.
51