ETHERNET PRINT SERVERS HIGH SPEED AND 4-PORT
3. Select the user or group from the Notify Candidates list. Set the first and
next intervals in the Notify Intervals screen. Use the defaults. The first
and next intervals are how many seconds the network will wait before it
notifies candidates about a print-job problem. The intervals specify how
often after the first notification candidates will be notified. Type in a
number in seconds (not minutes) for each interval and press <Enter>.
First:
Next:
40
Notify Intervals
30
60
Fig. 4-12. Notify Intervals.
Specify how long the network
should wait before alerting
users of a problem and how
often the alerts should occur.