Black Box LE3840A Manual page 90

8. Click on the OK button.
9. Ping the unit to test communications. Type:
ping <your IP address>
10. Ping should confirm your IP address with the message:
<your IP address> is alive
11. If the connection is confirmed, you can print.
Setting Up a DEC ULTRIX 4.3 RISC or OSF1/ALPHGA Remote Printer to use lpd
Set up a remote printer on the host that sends jobs to the Ethernet Print
Server using lpd. To do this, type:
1. At the prompt, type: lprsetup
2. Select add and press return.
3. Enter a name for your printer and press return.
4. You are asked if you want more information on specific printer types.
Press return.
5. A list of printers supported by ULTRIX appears. Type "remote" and
press return.
6. Enter a printer synonym (alias) and press return.
7. Designate a spooler directory and press return or accept the default
spooler directory displayed and press return.
8. Designate a remote system name and press return.
9. Designate a remote system printer name. Press return. Type, for
example: "PORT1"
10. You are asked to enter the name of a printcap symbol from a displayed
list. Type Q and press return.
11. Your configuration is displayed. You are asked whether these values are
final. Type Y or N and press return. An example is shown below.
CHAPTER 6: UNIX Printing through TCP/IP
89