ETHERNET PRINT SERVERS HIGH SPEED AND 4-PORT
3.5 Next Step
Do not plug your power supply into the Ethernet Print Server or a wall outlet.
You need to configure the Ethernet Print Server for each network protocol
before you power the Ethernet Print Server on.
Configure the Ethernet Print Server Protocols
To continue installation, you must configure and activate each network
protocol to work with the Ethernet Print Server. Each protocol has its own
chapter; go to the Configuration section for each protocol you will configure.
• Chapter 4—Novell configuration steps. We recommend that you do this
first, since Novell is always active.
• Chapter 5—AppleTalk configuration steps.
• Chapter 6—TCP/IP configuration steps.
24