Black Box LE3840A Manual page 56

CHAPTER 4: Novell NetWare Configuration and NIMANAGE Utility
Ethernet Print Server Diagnostics for NPS_991354.
A: Test Printer Ports.
B: Read Error Log.
C: Report Print Server Status.
D: Reset Unit.
[Enter] = Make Selection
[Esc] = Quit
D: Reset Unit lets you reset the
Ethernet Print Server in order to
clear an error condition which
prevents users from printing.
PostScript or PCL-based Printers
Next select the type of print job you want to send—a PostScript print job
(for PostScript printers only) or text, for PCL compatible printers like the
HP LaserJet. Once you answer this prompt, a print job is sent to the selected
printer port. If the port is being used by a print server for a print job, then
you receive the appropriate error message. Try to print again after the other
job has printed. See
Fig. 4-22.
Fig. 4-21. Test Printer Ports Option.
[F1] = Help
B: Read Error Log reports any
problems it encounters with the
Ethernet Print Server to an error
logging module. This retrieves
the messages from the unit's
error log.
C: Report Print Server Status
displays a status report for the
Ethernet Print Server.
A: Test Printer
Ports sends a test
print out to one of
the Ethernet Print
Server units'
printer ports.
55