Table of Contents
Advertisement
1.6
Notes on Storage or Carriage of Disk Array Unit
Do not store the disk array unit in an area where the temperature may
increase extremely or the difference between the warm and cold states is
considerably large. In addition, do not store the disk array unit in an area
with much moisture or dust.
Note that foreign substances such as water and metals may not be
entered into the disk array unit during storage. Using the disk array unit
with some foreign substance left inside may cause a fault, electrical shock,
or fire to occur.
During the storage, do not put any substance on the disk array unit or do
not place the disk array unit on an area where the unit may be dropped.
To use the disk array unit after storage for longer than six months, it is
recommended to contact your sales agent or maintenance engineer for
inspection and/or repair.
The array controller and the disk enclosure weigh 34 kg or more. Hold the
array controller and disk enclosure firmly with at least three people to carry
it. Carrying the devices only by two or less people may strain their back.
Do not hold the protrusions from the power supply or controller. Doing so
applies excessive force to the power supply and controller. As a result,
the power supply or controller may be damaged, and/or the array
controller or disk enclosure may fall and cause personal injury.
Make sure to package the disk array unit when transporting it with the
packing material that comes with the disk array unit. If any other packing
materials are used, a vibration or shock generated during transportation
may cause a malfunction of the unit.
7
Advertisement
Table of Contents
