RED epic Operation Manual page 84

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
PRESETS
Each preset has 0.000 Tint. Available preset options are:
 Incandescent: 2800 K
 Tungsten: 3200 K
 Fluorescent: 4500 K
 Flash: 5500 K
 Daylight: 5600 K
 Cloudy: 7500 K
 Shade: 9000 K
AUTO WHITE BALANCE
Auto white balance analyzes the central 25% of the image visible in the monitor to calculate a color temperature
that will render a white object as white.
To use auto white balance, follow the instructions below:
1. Place a white or grey object under the ambient light.
2. Go to Menu > Settings > Look > Color Temp.
Alternatively, select Color Temperature > Advanced... from the Upper Status Row.
3. Select Auto White Balance.
LGG (LIFT, GAMMA, GAIN)
Adjust the lift, gamma, and gain for the Red channel, Blue channel, and Green channel individually.
PROJECT
The Project menu includes: Frame Rate, Exposure, Timecode, Slate, and Format.
FRAME RATE
RECORDING FRAME RATE
Select the recording frame rate (also referred to as the capture frame rate). The recording frame rate is the
number of frames per second (FPS) that are recorded. The recording frame rate is different from the project
time base, which is the rate at which the footage will be played back.
The default recording frame rate is 23.98 FPS. If you change the project time base, the recording frame rate
automatically changes its value to match the project time base.
PROJECT TIME BASE
Select the project time base, which is the rate at which the footage will be played back. The project time base
displays in the lower left corner of the display.
The following project time bases are available:
 23.98 FPS (Default)
 24.00 FPS
 25.00 FPS
 29.97 FPS
 47.95 FPS
 48.00 FPS
 50.00 FPS
 59.94 FPS
COPYRIGHT © 2015 RED.COM, INC 955-0020_V6.0, REV-J | 84