Navigation Controls - RED epic Operation Manual

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T

NAVIGATION CONTROLS

This section describes basic controls for navigating the DSMC menus.
TOUCHSCREEN NAVIGATION
RED Touch displays offer intuitive menu control and four (4) programmable buttons.
1
2
3
4
# RED TOUCH BUTTON
1 User Key 1
2 Up Button
3 Down Button
4 User Key 2
NOTE: RED Touch display keys are programmable. For more information, go to
Navigate the menus using a touchscreen by using the following gestures:
 Tap: Tap has many functions:
‒ Tap to select a Basic Menu, submenu, or button.
‒ If a menu is open, tap anywhere outside the menu to save any changes and close the menu.
‒ Tap the right or left regions of the touchscreen to access the programmable soft keys.
 Swipe: Swipe to select different values in spinners or drop-down menus. For more information, go to
"Swipe-Up Menu" on page 62.
 Double-Tap: If the monitor is in Clean mode, changes to Overlay mode.
 Hold: Tap and hold an icon to bring up an advanced interface display.
 Pinch: Move two (2) fingers apart/together to increase/decrease the size of the image. By default, this
gesture is disabled.
For more information, go to
COPYRIGHT © 2015 RED.COM, INC
DESCRIPTION
Toggle 1:1 Magnify on/off
Increase display brightness
Decrease display brightness
Toggle Exposure Mode on/off
"Gestures" on page 76.
RED Touch 7.0" LCD
"Key Mapping" on page
955-0020_V6.0, REV-J |
103.
61