RED epic Operation Manual page 133

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
60 Hz. The target does not display on the selected monitor. You cannot control the monitor until you disable
the Enhanced A/F feature.
7. Select the Confirm target style from the Confirm Style drop-down menu:
CONFIRM DESCRIPTION
STYLE
None Square target; operates
like the target square in
Confirm mode
Circle Yellow circle around a
square target
Bar Bar target
Pie Pie target
8. Close the Focus menu.
The target displays on the touchscreen, and the monitor that you selected for the Enhanced A/F feature is
in Clean mode.
RACK FOCUS
Use the Rack tab to configure up to four (4) focus points and execute rack focus between them.
SET UP RACK FOCUS
1. Ensure that a DSMC Nikon Mount, DSMC Canon Mount, or DSMC Canon MOTION MOUNT is installed and
that a supported lens is attached to the BRAIN.
2. Go to Menu > Focus > Mode.
3. Select Rack from the Mode drop-down menu.
Spot is automatically selected from the Zone drop-down menu, since rack focus only works with Spot zone.
4. Select a size from the Size drop-down menu.
5. Go to the Rack tab.
6. Use the Rack Speed slider to change the speed at which the lens moves. Move the slider to the left for a
slower speed, and to the right for a faster speed.
7. Select the number of rack points (1–4) from the Rack Points drop-down menu.
COPYRIGHT © 2015 RED.COM, INC
OBJECTS IN TARGET ARE IN
FOCUS...
Target is yellow or green
Target is yellow or green; circle is
almost the same size as the square
Target is yellow or green; vertical
bar on the right side is filled up
Target is yellow or green; line
around the curve is filled up
OBJECTS IN TARGET ARE OUT OF
FOCUS
Target is red
Target is red; circle gets bigger
Target is red; vertical bar on the
left side is almost empty
Target is red; line around the
curve is almost empty
955-0020_V6.0, REV-J | 133