RED epic Operation Manual page 182

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
TIMECODE OR GENLOCK DOES NOT FUNCTION
SYMPTOM
The SYNC, GEN, and/or TC light is red, yellow, or greyed out.
POTENTIAL RESOLUTIONS
 Ensure your timecode or genlock device is compatible. For more information, go to
on page 170.
 Use a different cable.
 Ensure your timecode or genlock device settings match your project settings.
 Ensure your timecode or genlock device is set to the correct source. For more information, go to
on page 157 or "Genlock" on page
 Ensure that your Sensor Sync Mode is set to Genlock. For more information, go to
161.
 If you are using an Ambient device, set the ACN (Ambient Clockit Network) to Off.
COPYRIGHT © 2015 RED.COM, INC
160.
"Compatible Devices"
"Timecode"
"Sensor Sync" on page
955-0020_V6.0, REV-J | 182