RED epic Operation Manual page 64

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
DSMC SIDE HANDLE
This section describes the controls and display of the DSMC Side Handle.
1
2
3
4
5
6
# CONTROL/ITEM
1 LCD Display
2 User Keys (1–4)
1
3 Menu Button
4 Rocker Switch
5 User Keys (5–7)
6 Thumbwheel Lock
7 LCD Backlight Button
8 Navigation Group
9 User Keys (A–D)
10 Rotary Dial
11 Focus/Record Button
12 Stills/Motion Mode Switch Toggles between Stills/Motion Mode, enabled in v6.0 firmware or later
13 Battery Door Release
14 PC Sync Port
1. Press User Keys 1 + 4 simultaneously to lock/unlock DSMC Side Handle buttons to prevent inadvertent menu changes.
NOTE: DSMC Side Handle keys are programmable. For more information, go to
COPYRIGHT © 2015 RED.COM, INC
10
7
11
12
8
9
DESCRIPTION
Go to "DSMC Side Handle Display" on page 65
User 1-4 keys are used to select a slot on the DSMC Side Handle Display. The
front rotary then adjusts the value of the selected slot.
Access menus or exit currently selected menu
Open (Up)/Close (Down) Iris
5: Toggle Exposure Mode on/off
6: Key Disabled
7: Eject Media
Install and remove the DSMC Side Handle
Toggles LCD backlight illumination
Navigate menus and menu items; go to
A: Cycle Auto-Focus Mode
B: Auto White Balance
C: Toggle 1:1 Magnify on/off
D: Toggle Exposure Mode on/off
Adjust camera parameter values based on the underlined value on the
DSMC Side Handle LCD Display
Half-press for auto-focus; full press to Start/Stop Record
Press to open the battery door
Triggers external flashes or strobes
13
14
DSMC Side Handle
Controls
"Navigation Group" on page 63
"Key Mapping" on page
955-0020_V6.0, REV-J |
103.
64