Chapter 3: Epic/Scarlet Basic Operations; Power Operations - RED epic Operation Manual

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
03
EPIC/SCARLET
BASIC OPERATIONS

POWER OPERATIONS

This section describes the basic power operations of the DSMC
For more information, see the
WARNING: Modules, displays, and accessories are NOT HOT SWAPPABLE, meaning that you cannot remove or
install the item while the camera is turned on. Before installing or removing a module, display, or accessory,
you MUST turn off the camera. Failure to do so may result in damage to the item or DSMC
under warranty.
POWER INPUTS
There are two (2) primary power inputs that provide power to the DSMC BRAIN
# DSMC POWER INPUT
1 SEARAY power connector
2 DC IN connector
NOTE: Additionally, one (1) REDVOLT
short term power and support hot-swapping of other power sources.
COPYRIGHT © 2015 RED.COM, INC
DSMC Power Operation
1
2
DESCRIPTION
Provides power to the BRAIN from attached DSMC modules
Provides power to the BRAIN using a DSMC Power Adaptor or certain
battery modules, such as the Backpack Quickplate
battery may be used in conjunction with the DSMC Side Handle to provide
®
system.
®
Guide, available at www.red.com/downloads.
SEARAY Connector (top) and
DC IN Connector (bottom)
that is not covered
®
:
®
955-0020_V6.0, REV-J | 34