Channel Name - RED epic Operation Manual

Hide thumbs Also See for epic:
Table of Contents

Advertisement

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
LINK
 Gain Sliders: Ensures that each pre-amplifier (Pre-Amp) slider has the same value. If you select the check
box while the sliders have different values, you must change one (1) slider for all sliders to sync up.
 Volume Sliders: Ensures that each headphone (Headphone) slider has the same value, so that you can
control the master volume for headphones. If you select the check box while the sliders have different
values, you must change one (1) slider for all sliders to sync up.

CHANNEL NAME

You can rename each audio channel. The default names are Ch1, Ch2, Ch3, and Ch4. The channel names
display in the Audio Meter, but are not included in the clip metadata. For more information, go to
(VU Meter)" on page
145.
CHANNEL MODES
Match the channel mode to the incoming audio signal.
MODE
SOURCE
NONE
NONE
BALANCED
CAM ANALOG,
PRO I/O ANALOG
UNBALANCED
CAM ANALOG,
PRO I/O ANALOG
LINE
PRO I/O ANALOG
AES
PRO I/O AES A,
PRO I/O AES B
PHANTOM POWER (48V POWER)
Select the 48V Power check box to enable 48V phantom power for an audio channel. The 48V phantom power
option is only available when the channel mode is set to BALANCED.
LIMITER
Select the Limiter check box to add a limiter to the analog input signal chain. Use the limiter in dynamic
environments where external mixers are not practical for controlling signal strength. The limiter is only available
with analog audio input.
COPYRIGHT © 2015 RED.COM, INC
DESCRIPTION
Audio recording disabled.
Balanced microphone input. Enables the 48V phantom power option.
Typically used with microphones that have XLR connectors and internal
batteries.
Unbalanced microphone input with 3.3V bias. Disables the 48V
phantom power option. Typically used with unpowered microphones
that have 3.5 mm TRS plugs.
Fixed input gain with limiter settings if limiter is enabled. Disables the
48V phantom power option.
Only mode available for AES input. Disables the limiter and 48V
phantom power options.
"Audio Meter
955-0020_V6.0, REV-J |
142

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents