RED epic Operation Manual page 44

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
6. Remove the four (4) M2x0.4 x 4 mm OLPF module screws (P/N 600-0224) in a cross pattern ("X" pattern)
using a T6 TORX driver.
7. Remove the OLPF module and place it in its protective case.
COPYRIGHT © 2015 RED.COM, INC
Remove OLPF
module screws
Remove the OLPF
module
955-0020_V6.0, REV-J | 44