RED epic Operation Manual page 134

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
8. To reset the focus distance to the value calculated by the autofocus algorithm, select Re-Autofocus.
9. To set a rack point location, follow the instructions below:
A. Select the rack point: A, B, C, or D.
B. Select Close to return to the main screen.
C. Tap and hold the touchscreen where you want the rack point to be, or press and drag the rack point.
When you move a rack point, the camera autofocuses.
NOTE: To prevent a rack point from being accidentally moved, the rack point is less sensitive to touch
than the other focus targets. To fine-tune the rack point location, first drag the rack point farther than
it needs to be, and then drag it to where you want it to be.
NOTE: To view the focus distance for each rack point on the main screen, go to Menu > Settings > Display
> Modes and enable Rack Show Distance mode. For more information, go to
10. Select another rack point by performing any of the following actions:
‒ Select another rack point on the touchscreen.
‒ Press the key mapped to AF: Start (default is SH Record Half Press) to cycle to the next rack point in
order (A, B, C, and D). For example, if rack point A is selected when you trigger the AF: Start action,
the focus racks from point A to point B.
‒ Press a key that is mapped to racking to a specific rack point.
COPYRIGHT © 2015 RED.COM, INC
"Lens Tab" on page 78.
955-0020_V6.0, REV-J | 134