Communication Ports - RED epic Operation Manual

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
COMPATIBLE CABLE
 790-0341: RED
HD-SDI Cable (6')
®
HDMI OUT
A standard HDMI connector provides the following output:
 High-definition video output (default mode is Overlay)
 Two (2) channels of embedded audio
The HDMI output provides the formats described in the table below:
VIDEO FEED
2
480p
720p
1080p
1. Ensure you select a frequency supported by your monitor.
2. The HDMI output is progressive scan (p); it does not support progressive segmented frame (PsF) or interlaced (i) scan formats.
COMPATIBLE CABLE
 790-0331: RED HDMI Cable (5')

COMMUNICATION PORTS

SYNC (VIDEO SYNC IN)
The 4-pin 00B LEMO SYNC connector accepts timecode, genlock, and General Purpose Input (GPI) signals.
1 4
2 3
PIN SIGNAL
1 GROUND
2 SS/GPI
3 TIMECODE
4 GENLOCK
NOTE: Mating connector is FGG.00.304.CLAD27Z.
COPYRIGHT © 2015 RED.COM, INC
HDMI OUTPUT FORMATS
FREQUENCY (HZ)
50.00, 60.00
24.00, 25.00, 30.00, 50.00, 60.00
24.00, 25.00, 30.00, 50.00, 60.00
4-PIN 00B LEMO SYNC CONNECTOR
DESCRIPTION
Common ground
Shutter sync/general purpose input trigger
SMPTE unbalanced timecode input
Tri-level sync input
1
Front Face of the SYNC (Video Sync)
Connector (Looking at the DSMC)
955-0020_V6.0, REV-J |
DIRECTION
N/A
In
In
In
202