RED epic Operation Manual page 20

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
+1 ADAPTOR MODULE CONNECTIONS
1
4
5
# CONNECTOR
1 Mounting
2 EVF/LCD
1
3 Auxiliary power
out (PWR)
4 REDMOTE dock
®
connector
5 Dock connector
1. WARNING: DO NOT use the EVF/LCD connector if a Pro I/O Module is connected to the BRAIN.
NOTE: The default auxiliary power output setting is on. To toggle the power setting on/off, go to Menu > Power >
Power Out > +1 PWR. The last power output setting is saved until a firmware upgrade or a factory reset.
+1 ADAPTOR MODULE ACCESSORIES
For more information, as well as a full list of EVF/LCD cables and other accessory cables, visit www.red.com.
ACCESSORY CONNECTOR TYPE
4-Pin To 2-Pin 4-pin 0B to 2-pin 0B
Adaptor Cable LEMO
1
Micro HDMI-to- Micro HDMI to
HDMI Adaptor Standard HDMI
2
1. The 4-Pin to 2-Pin Adaptor Cable converts 4-pin power into a 2-pin female LEMO connection, enabling support for 2-pin based acces-
sories from the +1 Adaptor Module or Pro I/O Module.
2. The Micro HDMI-to-HDMI Adaptor is field-replaceable.
COPYRIGHT © 2015 RED.COM, INC
CONNECTOR TYPE CONNECTOR FUNCTION
1/4-20 mounting Supports bolt-on auxiliary equipment
N/A Custom digital video and power interconnection between
BRAIN and RED EVF or RED LCD; Pinout not published
4-pin 0B LEMO Supplies unregulated (+) 11.5 to 17 V battery pass-through;
Connect to 2-pin LEMO accessories with the RED 4-Pin to
2-Pin Adaptor Cable; Max sustained current is 2 A
8-point POGO Power and support for the REDMOTE
connector
SEARAY connector Supports power and communication with modules
CONNECTOR FUNCTION
Power support for 2-pin based accessories
HDMI video connection from BRAIN to support
auxiliary EVF/LCD attachment
2
3
+1 Adaptor Module
PART NUMBER
790-0334
N/A
955-0020_V6.0, REV-J | 20