RED epic Operation Manual page 204

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
CTRL (RS232 CONTROL)
The 4-pin 00B LEMO CTRL connector supports RS232 remote control for 3D camera communication and third-
party metadata ingest applications. For more information, go to
The General Purpose Out (GPO) tally presents 3.3 V at a maximum of 0.04 A between pins 1 and 3. When used
as a record tally, the rising edge of the pulse indicates start of record, falling edge represents end of record.
For more information about controlling the camera via RS232, download the REDLINK
red.com/developers.
1 4
2 3
PIN SIGNAL
1 GROUND
2 232 RX
3 SS/GPO
4 232 TX
NOTE: Mating connector is FGG.00.304.CLAD27Z.
COMPATIBLE CABLES
 790-0154: 3BNC-to-00 LEMO Sync Cable
 790-0187: 4-Pin 00 LEMO-to-Flying Lead
 790-0415: RED Start/Stop Cable (14-Pin LEMO to SYNC, CTRL, BNC)
COPYRIGHT © 2015 RED.COM, INC
4-PIN 00B LEMO CTRL CONNECTOR
DESCRIPTION
Common ground
RS232 RX
Shutter sync/general purpose output
RS232 TX
"BRAIN GPIO" on page
SDK, available at
®
Front Face of the CTRL (RS232)
Connector (Looking at the DSMC)
955-0020_V6.0, REV-J |
107.
www.
DIRECTION
N/A
In
Out
Out
204