RED epic Operation Manual page 163

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
C. For Target, select None.
D. Go to Menu > Settings > Setup > Communication and select the Ethernet tab.
E. Verify the Enable Camera to Camera check box is selected.
The LAN indicator in the Lower Status Row illuminates green.
NOTE: Cameras can also be set up in Master/Master configuration. To set as Master/Master, set Target to All
on both cameras, allowing either camera to make changes and control record start/stop.
COPYRIGHT © 2015 RED.COM, INC
Slave Settings
955-0020_V6.0, REV-J | 163