RED epic Operation Manual page 155

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
UPGRADE REDMOTE FIRMWARE (MAC)
1. Download the REDMOTE Firmware, available at www.red.com/downloads.
NOTE: Review the read_me_redmote_vX.X.XX instructions contained in the REDMOTE_vX.X.XX.zip file.
2. Uncompress the zip file.
3. Open the REDMOTE_vX.X.XX folder.
4. Click Select File in REDMOTE Upgrade Utility.
5. Open the redmote.1.bin file in the REDMOTE_Firmware_vX.X.XX folder.
"Selected File: redmote.1.bin" displays.
6. Click Start Upgrade.
When the file transfer is complete, the REDMOTE displays "Firmware Upgrade Successfully Done".
7. Click OK.
8. Click Disconnect to close the REDMOTE Upgrade Utility.
The REDMOTE automatically reboots.
After the upgrade is complete, the REDMOTE displays "POWER UP" and then "SEARCHING".
9. Select Cancel.
10. On the REDMOTE, go to Setup > Setup System and verify the current REDMOTE firmware version.
The REDMOTE upgrade is complete.
11. You may need to re-pair the REDMOTE with the DSMC after upgrading firmware. For more information, go
to "Pair the REDMOTE" on page
UPGRADE REDMOTE (WINDOWS)
This section describes the REDMOTE firmware upgrade process using Windows.
INSTALL REDMOTE UPGRADE UTILITY (WINDOWS)
1. Download the REDMOTE Upgrade Utility, available at www.red.com/downloads.
2. Uncompress and open the zip file.
3. Open the REDMOTE_Upgrade_Utility folder.
4. Open the Win folder.
5. Open REDMOTE_upgrade_setup.exe.
6. Click Extract All.
7. Select a destination and click Extract.
NOTE: If an error occurs during the installation of the REDMOTE Upgrade Utility, right-click the setup file and
select Run as Administrator to proceed.
8. Go to the location where you extracted the DSMC_Toolkit_vX.X file.
9. Open the REDMOTE_Upgrade_Utility folder.
10. Open the Win folder.
11. Open REDMOTE_upgrade_setup.exe. The License Agreement opens.
12. Click I Agree.
13. Ensure that the Install REDMOTE Firmware update check box is selected and click Next.
14. Select a destination and click Next.
15. Select a Start Menu folder where program shortcuts will be created. Default is REDMOTE Update.
16. Click Install.
17. Click Close after setup completes successfully.
18. Go to "Configure REDMOTE Connection with Computer (Windows)" on page
COPYRIGHT © 2015 RED.COM, INC
151.
156.
955-0020_V6.0, REV-J | 155