Power Ports; Ssd Module Connectors - RED epic Operation Manual

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T

POWER PORTS

DC IN (POWER INPUT)
The 6-pin 1B LEMO connector accepts DC input power from 11.5 V DC to 17 V DC. A built-in power conditioner
protects against reverse-polarity connections, electrostatic discharge (ESD), undervoltage, overvoltage, and
overcurrent.
WARNING: Both pairs of +VBATT and GROUND pins must be wired. Using a third-party power cable that wires
only one (1) pair of +VBATT and GROUND pins may damage the power supply or the DSMC
power supply or other components of the DSMC system caused by using an inappropriate power cable is not
covered under warranty.
2
3
1
4
5
6
PIN SIGNAL
1 +VBATT
2 +VBATT
3 SCL-BATT
4 GROUND
5 GROUND
6 SDA-BATT
NOTE: Mating connector is FGJ.1B.306.CWLD72Z.
COMPATIBLE CABLES
 790-0138: 2B-to-1B LEMO Power Adaptor Cable
 790-0164: XLR Power Cable (10')
 790-0165: XLR Power Cable (30")

SSD MODULE CONNECTORS

The connectors for the side SSD modules and the REAR SSD MODULE are described in the
Operation Guide, available at www.red.com/downloads.
COPYRIGHT © 2015 RED.COM, INC
6-PIN 1B DC INPUT CONNECTOR
DESCRIPTION
Power input, +11.5 to +17 V DC
Power input, +11.5 to +17 V DC
Serial battery bus clock
Power return (camera ground)
Power return (camera ground)
Serial battery bus data
Front Face of the DC In Power Input
Connector (Looking at the DSMC)
955-0020_V6.0, REV-J |
. Damage to the
®
RED DSMC Media
207