RED epic Operation Manual page 123

R E D D S M C O P E R AT I O N G U I D E : E P I C / S C A R L E T
SELECT OLPF TYPE (IF YOU HAVE THE DSMC INTERCHANGEABLE OLPF SYSTEM)
If your DSMC has the DSMC Interchangeable OLPF system, then you must select the correct OLPF type that
is installed.
Select your OLPF type by following the instructions below:
1. Go to Menu > Settings > Maintenance > OLPF.
2. Select your OLPF type from the Type drop-down menu:
IMPORTANT: Ensure the correct OLPF type is selected from the drop-down menu. Failure to select the
correct OLPF type will affect color accuracy.
NOTE: If you are unsure which OLPF is installed, go to
COPYRIGHT © 2015 RED.COM, INC
"Verify Installed OLPF" on page 47.
955-0020_V6.0, REV-J | 123