Setting Preset Points - IDVIEW PIV Series User Manual

Use to close the Iris on the dome camera.
Focus Far
Use to focus the selected dome camera far.
Zoom Out
Use to zoom the dome camera out. This function is for user to choose the
viewing area, more or less of it.
Pan / Tilt
Use to pan and tilt dome camera.

4.5.5 Setting Preset Points

The PIV
amount of preset points depends on the dome manufacturer.
Follow the steps to set preset points.
. • Press a Channel key to view the corresponding camera in full screen.
. • Then press DOME to enter dome control mode.
. • Use Direction buttons to position the dome camera to desired position.
. • Press 2 to view the dome control Hint Screen; press 2 again to toggle the
Hint Screen.
FREEZE: Focus Near / Far MENU / SEARCH: Zoom In / Out ENTER: Auto
Focus / Iris ◄▲▼►: Pan / Tilt CH1: Set / Go Preset CH2: Hint Screen On / Off
Dome Control
• Press 1 to access the Set/Go Preset function. The Dome Preset menu is displayed.
Index 1 2 3 4 5 6 7
Go Preset NO NO NO NO NO NO NO
. • Use UP / DOWN buttons to select the desired preset number from the
menu.
. • Set the <Set Preset> of the selected preset number to <YES>, and press
TM
Series MPEG-4 DVR allows user to set preset positions; the
Hint Screen DOME / ESC: Exit MODE / PLAY: Iris Open / Close SEQ /
Dome Preset Set Preset NO NO NO NO NO NO NO