Generalsystem Setup; Front Panel - IDVIEW PIV Series User Manual

Mpeg-4 dvr
Table of Contents

Advertisement

Ground
15
Ground
16
Audio In / Out The PIV
and playback. Audio In RCA connector is offered for connecting an audio source device
(e.g. external amplified microphone) to the unit; Audio Out RCA connector is offered for
connecting an audio output device (e.g. amplified speakers) to the unit.
LAN Connector (RJ-45)
The PIV
opens the door of PIV
USB Connector (x2)
There are two USB2.0 ports on the rear panel for users to connect
external USB devices to the unit, such as ThumbDrive or CD-ROM.
Power Jack
The PIV
jack. Please connect the power supply that ships with the
unit.
WARNING: Use of other power supply may cause
overloading.
Power Switch
Used to power up and shut down the unit.
3. General System Setup
The PIV
operations through the front panel easily. The following subsections
introduce
the general operations of the unit.
The regular displayed OSD information and its displayed positions are
shown
as following figure. The channel title will be displayed on the top-left side
of
the window, either in full screen mode or in multiple channel mode. The
Alarm In 15
31
Alarm In 16
32
TM
Series MPEG-4 DVR provides two channels of audio recording
TM
Series MPEG-4 DVR is capable of networking. The LAN port
TM
Series MPEG-4 DVR to Ethernet.
TM
Series MPEG-4 DVR has a free voltage AC power connection
TM
Series MPEG-4 DVR allows user to access some general

Advertisement

Table of Contents
loading

Table of Contents