Table of Contents
Advertisement
relative record settings, such as preset configuration, will follow the re
mode setting. The options are <720×480@30PPS>, <720×240@60PPS>
and <360 ×240@120PPS> in NTSC format; (<720×576@25PPS>,
<720×288@50PPS>, <360×288@SeriesPPS>in PAL format).
Move the cursor to <Record Mode> and press ENTER, then select a
Record mode using UP / DOWN buttons.
mess
FACTORY DEFAULT CONFIG!" will be shown on the screen. Pre
ENTER to confirm the selection, then the unit starts to format the hard
disks and load the factory default settings, or press ESC to abort.
3
.5.2 Schedule Setup
The Schedule Set
recording schedule. Select <Schedule Setup> from the Record Setup
menu and press ENTER; the following menu is displayed.
1.
1. Day Time Start
2.
2. Night Time Start
3.
3. Weekend Schedule
4.
4. Weekend Start
5.
5. Weekend End
.
•
Make appropriate changes of the st
Direction buttons.
.
•
Press
.
•
If you want to have a weekend record, choose <YES> to
Weekend Schedule in advance and then set the Weekend Start/End time.
.
•
Press ESC to back to previous page.
3
.5.3 Preset Record Configuration
The <Preset Config> is used to select the preset recording quality and
NOTE: After changing the Record Mode setting, the warning
age "This will FORMAT ALL HARDDISKS and LOAD THE
We strongly recommend to backup your programmed configuration
before making any changes on Record Mode settings.
up is used to set the day and night time, or weekend
Schedule Setup
06:00
18:00
YES
Fri 18:00
Mon 06:00
ENTER to confirm the settings or ESC to cancel.
art time of Day and Night Time using
cord
ss
enable the
Advertisement
Table of Contents
