Table of Contents
Advertisement
5.4.2.2 Weekend Schedule
The Weekend Schedule determines whether a weekend schedule is in
effect. Choose <YES> to take effect the related weekend settings.
5.4.2.3 Weekend Start / End
The Weekend Start Time indicates the specific day and time that a
weekend begins, for example, FRI 18:00. The Weekend End Time
indicates the specific time and day that a weekend ends, for example,
MON 06:00. Time is indicated in 1-minute increments.
Note that the value you have set indicates when the regular Day and Night
scheduling ends, and Weekend recording begins.
5.4.3 Preset Record Configuration
The <Preset Config> is used to select the preset recording quality and
frame rate. Different default recording quality levels are offered for user to
choose: <Best Quality>, <Standard>, <Extended Record>, <ezRecord >,
<512Kbps DSL>, <256Kbps DSL> and <128Kbps DSL >.
According to various Record modes, the preset configuration options for
normal and event status are described in terms of relative recording rate
(PPS) and recording size for each channel in the table below.
These preset conditions override any other quality and rate settings. The
default Preset Configuration setting is <Standard>.
Record Mode: Full-D1 mode (NTSC: 720×480@30PPS) (PAL: 720×576@25PPS)
Preset
Normal
Configuration
PPS
3.75 NTSC
Best Quality
(3.125 PAL)
Standard
3.75 NTSC
(Default)
(3.125 PAL)
Normal
Event
Size
PPS
15 NTSC
20 KB
(12.5 PAL)
15 NTSC
14 KB
(12.5 PAL)
Event
Event Active
Size
Both
20 KB
(Alarm+Motion)
20 KB
Both
Advertisement
Table of Contents
