Password; Admin / User Password - IDVIEW PIV Series User Manual

0 1 2 3 4 5
_
# −
◄ ► Backspace
Cancel OK
. • Use Direction buttons to move the cursor to the wanted character.
. • Press ENTER to add the character to the entry field (up to 11 characters).
. • When done, move the cursor to <OK> and press ENTER to save the
settings and exit.

5.1.5 Password

The Password menu allows administrator to change the password settings
for accessing the unit. Select <Password> in System Setup menu and
press ENTER; the menu displays as follows.
1. Admin Password
2. User Password
3. Enable Password
4. Load Factory Password

5.1.5.1 Admin / User Password

Only the administrator is allowed to change the user and administrator
password to any 4~8 digit number. Use the UP / DOWN Direction buttons
to select the desired account and press ENTER, the following menu is
displayed.
Use CHANNEL buttons to input the new password and confirm the new
password. After setting the new password, press ENTER to save the
settings and exit.
6 7 8 9
.
Delete
Password
Admin Password
Press Channel Keys To Enter Password
Press ◄ To Delete
!@
NO
None
(4-8 Digits)