Table of Contents
Advertisement
ENTER to save the position. Now the preset is set and ready to call.
4.5.6 Calling Preset Points
Follow the steps to call preset points.
.
•
Press a Channel key to view the corresponding camera in full screen.
.
•
Then press DOME to enter dome control mode.
.
•
Press 2 to view the dome control Hint Screen; press 2 again to toggle the
Hint Screen.
.
•
Press 1 to access the Set/Go Preset function.
.
•
Use UP / DOWN buttons to select the desired preset number from the
menu.
.
•
Set the <Go Preset> of the selected preset number to <YES>, and press
ENTER to call the preset point.
.
•
Now the selected dome camera rotates to the preset position
automatically.
Dome Preset
Index
Set Preset
1
2
3
4
5
6
7
Video Export
The unit allows you to export wanted video to the built-in CD-RW or an
external device, such as a USB thumb Drive, and save the video to *.drv
file.
If you want to export video to an external device, make sure the external
storage has been connected to the DVR unit and the port has been set
appropriately for video export.
unit,
the device has priority over the built-in CD-RW; which means that the
Go
Preset
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NOTE: Once an external device has been connected to the DVR
Advertisement
Table of Contents
