Table of Contents
Advertisement
To delete previous character To exit the virtual keyboard
Select <Backspace>
simultaneously.
To delete current
character
Select <Delete> and
simultaneously.
Select <OK> and press ENTER to save the settings and exit, or press
ESC to exit without saving changes
System Date / Time Setting
User can set the current date, time and other OSD parameters in
Date/Time menu. The administrator's privileges are required for entering
the submenu. In OSD Main menu, select <System Setup> and press
ENTER, then select <Date/Time> to access the Date/Time menu; the
menu displays as follows.
1.
1. Date 2005/02/21
2.
2. Time 10:39:26
3.
3. Date/Time Display 1 Row
4.
4. Date Display Mode Y/M/D
5.
5. Time Display Mode 24 HR
6.
6. Date/Time Order Date First
7.
7. Daylight Saving Time ON
8.
8. DST Start Apr, 1 st Sun, 02:00
9.
9. DST End Apr, Last Sun, 02:00
10.
10. DST Bias 60 Min
3.4.1 Set Date / Time
Set Date / Time
Select <Date> / <Time> and press ENTER for adjusting the settings.
LEFT / RIGHT buttons are used to move the cursor to previous or
next field, ENTER is for selecting, and UP / DOWN are used to
change the value in the selected field.
press ENTER,
and
press
ENTER,
Date/Time
or press
MODE
or
press MODE and
UP
and
DOWN
Advertisement
Table of Contents
