Searching Recorded Video; Searching By Time - IDVIEW PIV Series User Manual

previously programmed in Call Monitor Schedule menu.
. • Press ESC to return the front panel to Main monitor control mode.

Searching Recorded Video

The PIV
recorded video by date and time or events. Entering the specific date and
time of the wanted video, the unit will then search for the matched video
and play it on the monitor. Alternatively, user can search event video by
selecting channel as well.
In live or playback mode, press SEARCH to enter the Search menu, which
is shown as follows.
Search ----------Search By Time---------- From: 2005/01/01 00:00:00 End:
2005/05/01 00:00:00 Start Time: 2005/01/01 00:00:00 Begin Playback
Event List

4.3.1 Searching by Time

Follow the steps to search video by date and time.
. • Press SEARCH button to enter the Search menu; the From Time and End
Time of the available video is listed on top of the screen. The value is unchangeable.
. • Use Direction buttons to move the cursor for setting the Start Time;
adjusting the date and time values by UP / DOWN keys.
. • Press ENTER to confirm the settings or ESC to abort.
. • Move the cursor to <Begin Playback> and press ENTER to start playing
back the selected video.
. • Either press PLAY/STOP again to return to live video.
NOTE: If there is no available recorded video that matches
your specified time and date, the unit starts playback from the next
available video.
DST icon if the Daylight Saving Time function is enabled. "S" indicates
TM
Series MPEG-4 DVR is capable of searching and playing back
----------Search By Event---------- Select Channel: CH1 CH2 CH3 CH4
NOTE: The date/time information will be shown on the screen with a