Table of Contents
Advertisement
5.1.5.2 Enable Password
The item is used to determine if the password is required for accessing the
OSD menu. Select <YES> to demand entering password when accessing
the OSD menu; if not, select <NO>.
5.1.5.3 Load Factory Password
This item allows the administrator to reload the factory password in case
that the administrator cannot remember the password. There are three
options to select from: <Admin> (reload the Admin password only),
<User> (reload the User password only), and <All> (reload the Admin and
User passwords). The factory password is 1234 for administrator and
4321
5.1.6 Network Setup
The Network Setup menu allows the administrator to configure the
network by specifying the network related settings, such as IP address
and Netmask, etc.
See your network administrator and/or network service provider for
more specific information.
From the System Setup menu, select <Network Setup> and press
ENTER. The following menu displays.
1.
1. LAN Setup
2.
2. Trigger Port 80
Items in this menu are described in the following sections.
5.1.6.1 LAN Setup
for
Network Setup
user.
Advertisement
Table of Contents
