Table of Contents
Advertisement
Camera Setup
The items in the Camera Setup menu enable user to set camera
parameters, including camera title, dome protocol and ID for each
connected camera. The menu is shown as below.
1.
1. Camera Select CH1
2.
2. Dome Protocol None
3.
3. Dome ID 0
4.
4. Camera Title CH1
5.
5. Covert NO
6.
6. Termination NO
7.
7. Brightness 0
8.
8. Contrast 0
9.
9. Saturation 0
10.
10. Hue 0
Items in this menu are described in the following subsections.
5.3.1 Camera Select
The item is used to select a camera for setting the parameters. The
related settings will follow the selected camera, such as dome protocol
and camera title.
Move the cursor to <Camera Select> and press ENTER, then select a
channel
5.3.2 Dome Protocol
Select the communications protocol associated with your dome camera
using the ENTER and Direction buttons. The available protocol includes
<IDView>, <Pelco D>, <Pelco P>, <AD422> and <None> (default).
5.3.3 Dome ID
Camera Setup
using
UP
/
DOWN
buttons.
Advertisement
Table of Contents
