Event Icon; Event Duration; Per Channel Config - IDVIEW PIV Series User Manual

This item allows user to enable / disable the PIV
internal buzzer. If set to <ON>, the buzzer is activated in response to an
alarm. If set to <OFF>, the buzzer is not activated. The default setting is
<ON>.

5.6.2 Event Icon

The item enables (ON) / disables (OFF) the display of Event Icon on the
main monitor when an alarm event occurs. The default setting is <ON>
(enable).
The event types are represented by a character respectively; the
descriptions are as below table.
Event type Description
A Alarm in event
M Motion detection event
L Video loss event

5.6.3 Event Duration

This item determines the duration of the buzzer and Alarm Out relay
function after an alarm is triggered. The available event duration range is
from 1 second to Series seconds. The default setting is 5 seconds.

5.6.4 Per Channel Config

This menu is used to set the Video Loss Detect, Motion Detect and Alarm
In / Out function for each channel. The menu is displayed as below.
1. 1. Channel Select CH1
2. 2. Video Loss Detect ON
3. 3. Motion Detect ON
4. 4. Detection Config
5. 5. Alarm In OFF
6. 6. Alarm Out None
Per Channel Config
TM
Series sMPEG-4 DVR