Table of Contents
Advertisement
To export event video, follow these steps:
.
•
Press SEARCH and play wanted event video. To play event video, refer to
Section 4.3 Searching Recorded Video.
.
•
After entering the playback mode, press CALL. The "esBurn" window
displays as below figure. The information shown on it is for read only.
.
•
If there is no any exportable external device connected to the DVR unit, a
warning message will be shown on the screen
.
•
Press ENTER to start the export the whole event video to the connected
device; or, press ESC to abort.
ezBurn confirmation
Selected Device: Built-in-CD-RW
All data on the disc will be erased.
Exported Required Size = 11 MB
Export Event Info:
Data
Time
205/11/07
AM10:42:35
Enter: YES ESC: NO
5. Advanced System Configuration
The detailed functions and settings of PIV
set using the hierarchical OSD menu. This chapter particularizes the items
and options in the OSD menu.
To enter the Main menu, press MENU and then enter Administrator or User password.
The default passwords are shown in the following table. The same default passwords
are used for entering the remote viewing software DvrRemote
It is strongly suggested to change the passwords to prevent unauthorized access to the
unit.
After entering the correct password, the Main menu is displayed.
1.
1. System Setup
2.
2. Monitor Setup
3.
3. Camera Setup
4.
4. Record Setup
Ch
Type
13
Motion
Main Menu
TM
Series MPEG-4 DVR can be
TM
Lite.
Advertisement
Table of Contents
