Position The Unit; Selecting Video Format; Connecting Devices To The Unit - IDVIEW PIV Series User Manual

In order to prevent the unit from data loss and system damage that
caused by a sudden power fluctuation, use of an Uninterruptible Power
Supply (UPS) is highly recommended

2.1 Position the Unit

Firstly, note to position / mount the PIV
place and be sure to power off the unit before making any connections.
The placed location should avoid hindering or blocking the unit from
airflow. Enough airflow is needed to protect the unit from overheating. The
maximum allowable temperature of operating environment is 40°C.
The unit utilizes heat-conducting techniques to transfer internal heat to the
case, especially to the bottom side of the unit.
space

2.2 Selecting Video Format

The PIV
or PAL video formats. Please contact with a qualified service person to
perform

2.3 Connecting Devices to the Unit

This section lists some notices that should be given before making
any connections to the PIV
CD-ROM, USB Hard Disk Drive, etc., only after the unit is successfully
NOTE: Be sure not to remove the rubber feet, and always leave a
for air ventilation
TM
Series MPEG-4 DVR is designed to operate under either NTSC
the
NOTE: Connect short-term devices, such as USB ThumbDrive, USB
TM
Series MPEG-4 DVR in a proper
on the
installation
TM
Series MPEG-4 DVR.
unit's bottom
procedure.
side.