Event Setup; Internal Buzzer - IDVIEW PIV Series User Manual

This item is used to set the Main / Call Monitor camera sequence in full
screen format. Move the cursor to <Main Monitor Schedule> and press
ENTER; the menu is displayed as follows.
Follow these steps to set a sequence:
. • Press LEFT direction button to delete the original setting.
. • Press the desired Channel buttons to assign a camera to that location in
the sequence.
. • Continue the steps until the sequence is completed.
A sequence can have up to 16 entries. User can select fewer than 16
entries for camera sequence and leave the remaining entries blank. The
sequence can include a specific camera or cameras multiple times.

Event Setup

This menu allows user to determine PIV
response to an alarm event. In the Main menu, move the cursor to <Event
Setup> and press ENTER. The following menu is displayed.

1. Internal Buzzer

2. Event Icon
3. Event Full Alarm
4. Event Duration
5. Per Channel
Config
Items in the Event Setup menu are described in the following subsections.
5.6.1 Internal Buzzer
Main Monitor Schedule
_►_►_►_►_►_►_►_►
_►_►_►_►_►_►_►_
Press 1-16 Key To Select Channel Press ◄ To Delete
Event Setup
TM
Series MPEG-4 DVR behavior in
ON
ON
OFF
5 sec