Table of Contents
Advertisement
5.1.3 Date / Time
User can set the current date, time and other OSD parameters in this
menu. The Administrator's privileges are required for entering the
submenu. In System Setup menu, select <Date/Time> and press ENTER;
the Date/Time menu displays as follows.
1.
1. Date 2005/02/21
2.
2. Time 10:39:26
3.
3. Date/Time Display 1 Row
4.
4. Date Display Mode Y/M/D
5.
5. Time Display Mode 24 HR
6.
6. Date/Time Order Date First
7.
7. Daylight Saving Time ON
8.
8. DST Start Apr, 1 st Sun, 02:00
9.
9. DST End Apr, Last Sun, 02:00
10.
10. DST Bias 60 Min
NOTE: The reset date / time setting applies to record new video, the date and time of
previously recorded video will not be changed.
NOTE: To avoid record database corruption, after changed Date/Time setting, clear the
database is recommended.
5.1.3.1 Date / Time Setting
Select <Date> or <Time> and press ENTER for adjusting the settings.
LEFT / RIGHT buttons are used to move the cursor to previous or next
field, ENTER is for selecting, and UP / DOWN are used to change the
value
5.1.3.2 Date / Time Display
Date/Time
in
the
selected
field.
Advertisement
Table of Contents
