Dome Control - IDVIEW PIV Series User Manual

menu. The administrator password is required to access the function.
Select <Record Setup> from Main menu, and then in Record Setup menu,
move the cursor to <Purge Data> and press ENTER; the Purge Data
menu is displayed.
1. 1. Purge All Data NO
2. 2. Purge All Event Data NO
3. 3. Purge Event Before 2000/01/01
4. 4. Start to Purge NO
The first four items are used to select the data that should be purged. The
items are described as follows. After select the data you want to purge, set
the fifth item <Start to Purge> to <YES> and press ENTER to start the
deleting process.
Purge All Data
Select the item to delete all recorded video from database.
Purge All Event Data
Select the item to delete all event video from database.
Purge Event Before
The item is used to delete event video that recorded before a specific
date.

Dome Control

TM
PIV
front panel.
In Live mode, user can press CHANNEL button to display the desired
dome camera in full view. To enter Dome Control mode, press the DOME
button and press channel key 2 to display the hint screen; to exit the
Dome Control mode and back to live mode, press ESC or DOME.
To configure the dome controls settings, see the following sections.
Series MPEG-4 DVR allows user to control a dome camera by the
Purge Data