Rear Panel Connections - IDVIEW PIV Series User Manual

powered up.
Connecting Required Devices
Before power up the unit, you should connect cameras and a main
monitor to the unit for basic operation. If needed, connect a call monitor for
displaying full screen video of all installed cameras in sequence.
Connecting Short-term Device If you plan to install any short-term
devices to the PIV
system, such as USB CD-ROM, USB Hard Disk Drive, etc. Make sure
connecting those devices only during the unit is powered up. Because
TM
PIV
the power-up process is done completely.

Rear Panel Connections

There are various connectors on the rear panel used for PIV
MPEG-4 DVR installations. The following figure shows the connectors by
name; and followed by the detailed description of each connector.
Main Monitor (S-Video / BNC/ VGA)
S-Video , BNC and VGA output connectors are offered for connecting to a main
monitor. The main monitor displays live image and playback recorded video in either
TM
Series MPEG-4 DVR and use them as part of the unit
Series MPEG-4 DVR can recognize the external devices only after
TM
Series