Detected Area Setup; Sensitivity; Area Threshold - IDVIEW PIV Series User Manual

-Detected Area Setup

The Detect Area is displayed as follows after selecting this item. The
detection area consists of 273 (21×13) detection grids in NTSC video
format or 336 (21 ×16) grids in PAL format.
■ ■■
■■■■■■■■■■
Use the Direction buttons to move the cursor and press ENTER to enable or
disable a grid. Press MODE to select all of the grids for detection; press
MODE again to de-select all of the grids.
-

Sensitivity

The item is used to set the sensitivity of detection grids for the camera. A
greater value indicates more sensitive motion detection. A motion alarm will
be triggered, once the amount of motion detected exceeds the Threshold
value
Move the cursor to <Sensitivity> and press ENTER, and then use UP / DOWN
buttons to adjust the value. The value is indicated in 4% increment.

Area Threshold

-
■
■ ■■■■■■■■■
■■ ■