Table of Contents
Advertisement
The item is used to adjust the screen center of the main monitor display
area. Follow the steps to set the center point.
•
Select <Screen Center Adjust> from the Monitor Setup menu and
press ENTER. The adjusting screen is as follows.
.
•
Position the screen center position using the Direction buttons.
.
•
Press ENTER to exit when finished.
5.2.6 Show Color Bar
Choose this item to display a color bar pattern on the screen. The color
bar helps to adjust the monitor hue, saturation, text color, and display
options. Press ESC to exit the color bar pattern and return to the OSD
menu.
5.2.7 VGA Resolution
The item allows user to select appropriate VGA resolution for the VGA
monitor connected to the unit. The options are <800×600> (default),
<1024×768> and <1280× 1024>.
NOTE: If the selected VGA resolution is too high for the monitor, the
message "No Signal'' will be shown on screen. Then please press ESC on the
front panel to restore the original setting.
Screen Center Adjust
▲ ◄ + ► ▼
Advertisement
Table of Contents
