Table of Contents
Advertisement
Users are allowed to choose to set the date / time OSD displays in 1 or 2
rows. Use the UP / DOWN buttons to change the setting. The default is to
display
5.1.3.3 Date Display Mode
This function allows user to set the OSD display type of the date / time.
There are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. "Y"
represents "Year", "M" represents "Month" and "D" represents "Day".
Use UP / DOWN keys to change the setting. The default setting is
<Y/M/D>
5.1.3.4 Time Display Mode
User can choose to set the time format to <12 hour> or <24 hour>. Use
the UP / DOWN buttons to change the format. The default setting is <24
hour>.
5.1.3.5 Date/Time Order
The item is used to set the order of Date/Time display to <Date First> or
<Time First>. Select this item and press ENTER, then use UP / DOWN
buttons
5.1.3.6 Daylight Saving Time
The item is for people who live in certain regions to observe Daylight
Saving Time. Select <ON> to enable, or <OFF> to disable the function.
If the function is disabled, the DST Start / End time and DST Bias will be
grayed out and cannot be accessed. If this function is enabled, the
the
date
/
in
both
to
time
OSD
NTSC
/
change
in
one
row.
PAL
formats.
the
setting.
Advertisement
Table of Contents
