Software Upgrade Via Local Device; Language - IDVIEW PIV Series User Manual

5.1.1.3 Software Upgrade via Local Device

This item is used for updating the PIV
local device. The menu is displayed as follows.
Software Upgrade via Local Device Upgrade Version Select xxxx-xxxx-xxxx-xxxx NO
Connect an USB drive contains upgrade software to the unit; the available upgrade files
will be listed in the menu. To update the system, select a file and use UP / DOWN
buttons to choose <YES>. Press ENTER to confirm the selection and start the upgrade
TM
process. The PIV
and reboots automatically.
The upgrade may take several minutes to save the changes in the memory of the
system. After reboot the unit, please check the software version again.
NOTE: No power interruption is allowed during the software
update. Ensure that no power interruption can occur until the unit is
completely rebooted.
before the unit has completely shut down (hard drive and fan are off).
Removing the external USB Thumb drive/CD-ROM before shut down can
cause

5.1.2 Language

The Language item allows user to select the language for the OSD menu
and screen messages. Language selection takes effect immediately when
the selection is done. Press UP / DOWN to select from listed languages
and
Series MPEG-4 DVR uploads the software, updates the system files,
NOTE: Do not remove the external USB Thumb drive/CD-ROM
the
press
TM
Series MPEG-4 DVR software by
system to
ENTER
update improperly.
to confirm.