Call Monitor Control - IDVIEW PIV Series User Manual

Press the MODE button repeatedly in playback mode, a 16-window viewing mode
contains both live and playback image appears. This view mode is
The eight windows on the top side of the screen are used to view the Live
video from channel 1 to channel 8 respectively, and the other windows
allow user to view Playback image from channel 1 to channel 8.

Call Monitor Control

Users are allowed to use the PIV
control a call monitor display without having to access the Main menu.
Two viewing modes can be displayed on call monitor: Sequence display
and Single camera display. To program the call monitor sequence, see
section 5.5 Sequence Setup.
Follow the steps to control the call monitor.
• Press the CALL button on the front panel to enter call monitor control
mode, the message "Call Mode" will be shown on the bottom-left of the
screen.
Press 1-8 Key To Select Channel Press SEQ To Enable Sequence
Call Mode
. • Press CHANNEL button to display the associated camera on call monitor.
. • Alternatively, press SEQ repeatedly to display the sequence of cameras
TM
Series MPEG-4 DVR front panel to